Chimney trouble shows as damp on the breast inside, crumbling mortar, or a leak where the stack meets the roof. On Bath's soft stone stacks, eroded lime pointing and failed lead are the usual causes.
Damp staining on the chimney breast inside the house
Crumbling or missing mortar in the stack
A leak in the ceiling near the chimney
Loose or leaning pots
Vegetation growing from the stonework
When it is not the answer: If only the flaunching or a length of flashing has failed, you don't need a full rebuild — a targeted lime repair is far cheaper and keeps the original stack. Read the full guide.
Chimney lead weatherproofing: flashing, apron and back gutter
Chimney Repairs in Oldfield Park
Chimney Repairs Oldfield Park
Chimney repointing in lime mortar on Victorian Bath stone properties is one of our most common jobs in Oldfield Park. The original sooty lime mortar on the Moorland Road and Maple Grove terraces is now 100-plus years old. We use NHL 2 or 3.5 lime mortar on all stone properties.
We cover Oldfield Park as part of our core Bath service area with no additional call-out charges. All work is carried out by our own team — no subcontractors. Free assessment, honest quote before any work starts.
Lime Mortar Chimney Work in Oldfield Park
The Bath stone and local brick chimneys on Victorian properties throughout Oldfield Park require lime mortar for all repointing. NHL 2 or 3.5 mortar matched to the original pointing profile. Cement mortar is never used on Oldfield Park period masonry.
For chimney repairs in Oldfield Park call 0122 528 7924. Free assessment, no call-out fee.
Chimney Repairs in Oldfield Park
Chimneys on Oldfield Park Victorian Properties
The Stack Density
Oldfield Park Victorian terraces have one of the highest chimney stack densities of any Bath suburb. Most mid-Victorian terraces have two to four stacks per property, many of which were capped off when gas central heating was installed in the 1970s and 1980s. Capped stacks still require maintenance — the masonry above the cap continues to weather, and lead flashings at the roof junction continue to cycle through thermal movement regardless of whether the flue is in use.
Lime Mortar — Why It Matters Here
Virtually all chimneys in Oldfield Park are built from Bath stone rubble or local brick with soft lime mortar joints. Using cement mortar for repointing on these stacks is the single most damaging thing a roofer can do. Cement is harder than the surrounding masonry; it traps moisture; it cracks under differential thermal movement; and when it cracks it pulls fragments of Bath stone or brick face away with it. Every chimney repoint we carry out in Oldfield Park uses NHL 2 or 3.5 lime mortar matched to the original.
The Lead Flashing Cycle
Lead step flashings at chimney bases on Oldfield Park Victorian properties have typically been replaced once or twice already — the original lead installed in the 1880s to 1905 period lasted 60 to 80 years, and replacement lead fitted in the 1960s to 1980s is now at or past end of life on many properties. When we reline step flashings we use Code 5 lead with correct bay widths and soaker replacement underneath, not just new lead over old.
Customer Reviews
Recent Jobs
★★★★★
“Chimney Repairs in Oldfield Park — prompt attendance, honest assessment, work done correctly to a good standard. No call-out fee.”
Henry L. · Oldfield Park, Bath BA2
★★★★★
“Called for chimney repairs in Oldfield Park. They were there when they said they would be and the job was done properly first time.”
Isabella K. · Maple Grove, Oldfield Park
★★★★★
“Free survey, clear written quote, completed on time. Exactly what you want from a local Bath roofer.”
Julian J. · Oldfield Park, BA
Pricing and Process
What to Expect from Chimney Repairs
How We Price Chimney Work
Chimney repair pricing is driven by three variables: height (which determines scaffold or access equipment cost), extent of mortar failure (how many courses need repointing), and lead specification (whether step flashings, back gutters, or saddles need replacement alongside the masonry work). We always inspect the full chimney — all four faces, not just the accessible street-facing side — before providing a quote. Work found on the less visible faces is included in the original quote, not added as a surprise on completion.
Mortar Matching on Period Properties
One of the most visible quality differentials between chimney repointing contractors is mortar colour matching. Lime mortar comes in a range from near-white to warm buff depending on the aggregate used, and Bath stone properties in particular show mismatched pointing very clearly. We carry iron oxide pigments and a range of aggregates to match the existing mortar colour as closely as possible. For listed buildings where the planning authority may inspect the completed work, we prepare a sample panel for approval before committing to the full stack.
After the Repoint — What to Check
A correctly completed chimney repoint should show no mortar smearing on the face of the brickwork or stonework, clean raked joints at a consistent depth, and a struck profile that matches the original. Flashings at the base should be dressed tight to the masonry with no visible gaps. Flaunching around pots should be smooth with no cracking. If you notice any of these issues after a repointing job, call the contractor back before the mortar has fully cured — remedial work on fresh lime mortar is straightforward; remedial work on hardened mortar requires breaking out and starting again.
The process
How a Oldfield Park Chimney Repairs Job Runs
1. Four-face survey
We inspect every face of the stack — the weather-facing sides erode faster than the one you see — and photograph the faults.
2. Written quote
We quote the repointing, flashing, flaunching or rebuild needed, using lime mortar for Bath's soft stone, at a fixed price.
3. Scheduling & access
We book the work and arrange the tower or scaffold access a stack needs for safe standing time.
4. The work
We rake out failed mortar, repoint in matched NHL lime, renew lead flashing and flaunching, and re-bed pots as needed.
5. Cleanup & sign-off
We clear debris, leave the stack weathertight, and hand over your guarantee.
Timescales
Job Durations at a Glance
Job
Typical duration
Re-flaunching / re-bed pots
Half a day
Lead flashing renewal
Half to full day
Stack repointing (lime)
1–2 days
Partial stack rebuild
2–3 days
Full stack rebuild
3–5 days
Lime mortar needs frost-free conditions to cure properly, so we schedule stack work around cold snaps in winter.
Access
Getting Safely onto Oldfield Park Roofs
Chimney work almost always needs a tower or scaffold for safe standing time at the ridge — itemised in your quote, never a hidden extra. Scaffold is specified for: nearly all stack work — safe access to the ridge is essential and always specified - always itemised in your written quote, never a hidden extra, and we arrange it.
Dense Victorian bay-fronted terraces with tight rear access and party-wall detailing. Pavement scaffold and skip permits go through Bath & North East Somerset Council; allow a few working days on streets like Moorland Road, Livingstone Road, Shaftesbury Road where space is tight.
How many faces of the stack have failed (weather sides worst)
Access height and scaffold vs tower for safe standing time
Whether pots, flaunching and flashing all need renewal
Worked example: Repointing all four faces of a soft-stone stack in lime plus renewing the lead flashing on a Widcombe hillside terrace: around £900 including tower access.
No deposit on smaller chimney repairs. Staged payment on rebuilds, balance on completion — nothing before materials are on site. VAT included.
Covering BA1, BA2 and surrounding postcodes.
Guarantee
Your Guarantee, Explained
Chimney workmanship is guaranteed for 10 years, extending to rebuilds and full repointing; because we use correct NHL lime, the work lasts rather than damaging the stone as cement does.
Covered: workmanship for 10 years, in writing, transferable if you sell.
On top: manufacturer warranties on materials (terms vary by product).
Not covered: storm or impact damage - that is an insurance matter, and we will document it for your claim.
If a fault appears in covered work, we come back and put it right. No quibbling, no re-charge.
Good to know
What It Is Like While We Work
Stack work means access equipment up for a few days and some mess at the base — we sheet and protect below, and clear everything on completion. You do not need to stay home for external work - we just need power and access agreed in advance.
Lime pointing waits for frost-free weather to cure; we won't point a stack into a cold snap and risk the mortar failing. Oldfield Park's packed terraces see moss on shaded slopes and shared valley gutters.
FAQ
Frequently Asked Questions
Free assessment provided for all chimney repairs work in Oldfield Park. Call 0122 528 7924 to arrange. Prices depend on scope and access.
Yes. We cover Oldfield Park and all of BA2 for chimney repairs. No call-out fee, free assessment.
No. We never charge a call-out fee. You pay only for work carried out, quoted before we start.
Yes. We cover Oldfield Park and surrounding Bath areas 24 hours a day. Call 0122 528 7924 at any time.
Victorian welsh slate terraces, nail sickness common, lead soaker failure, lime mortar on stone properties. We work with all these material types and carry the most common repair materials on all vehicles.
Yes. All assessments and surveys are free and no-obligation. Call 0122 528 7924 to arrange.
Oldfield Park is within Bath's city area and we can usually attend within 1 to 3 hours for emergencies. Planned work is scheduled to your convenience. Call 0122 528 7924 to confirm.
Free Oldfield Park Roofing Quote
No call-out fees. No obligation. Free assessment and honest quote before any work starts.
